Hüdraulilised adapterid on ühte tüüpi hüdraulilised liitmikud hüdrauliliste torude, hüdraulikavoolikute ja toruliitmike ühendamiseks. Seal on erinevaid nimetusi, nagu hüdraulilised adapterid (Suurbritannia), hüdraulilised liitmikud (kõige populaarsemad), hüdraulilised pistikud jne.
Erinevate standarditega hüdraulilise adapteri tüübid on järgmised:
Ameerika SAE standardid nagu SAE J514, SAE J1453, SAE J518 jne, SAE keermega hüdrauliliste toruliitmikud, toruadapterid, äärikuadapterid, toruliitmikud.
Jaapani JIS-standard JIS B2351 tolline keermega ja JIS B8363 meetriline keermeotsa liitmik ja adapterid hüdraulikavoolikute komplektide jaoks.
Suurbritannia standardid BS 5200, BSP keermega hüdraulilised adapterid ja pistikud.
Saksamaa standard DIN 2353,Metrilise keermega survetoru liitmikudlõikerõngaga, ilma metriliste liitmike ja ühendusdetailidega
Jiayuan on juhtiv, professionaalne hüdrauliliste adapterite liitmike tootja, pakume erinevaid standardeid ja kohandatud suurusi, nagu hüdraulikavoolikute adapterid, meetrilised hüdraulilised adapterid, sae hüdraulilised adapterid, sae äärikuadapterid, teisendusadapterid üksteisele JIC, metric, npt, orfs mees, naine jne
Jiayuan teeb kvaliteedikontrolli juhtimisel ja automatiseerimise tootmistehnoloogias häid edusamme, püüdke hüdrauliliste liitmike valdkonnas juhtpositsiooni võtta. Kontrollime rangelt toote kvaliteeti materjalist valmistoodanguni vastavalt ISO 9001, PPAP aruandele, sealhulgas materjali keemilise koostise aruanne, mõõtmete kontroll, soola pihustuskatse, rõhukatse, pöördemomendi test ja puhtusaruanne jne.
Meie toodet kasutatakse erinevates tööstusseadmetes, nagu näiteks ehitusmasinad, põllumajandusseadmed, tarbesõidukid, naftakeemiaseadmed, merelaevade ehitamine jne. Meie tooteid eksporditakse Saksamaale, Jaapanisse, Suurbritanniasse, Itaaliasse, Kanadasse, Venemaale, Brasiiliasse jne.
Kui teil on mingeid päringuid, võtke palun meiega ühendust.
jyray@72338.com
Erinevad hüdraulilise adapteri JIC, ORFS, SAE ääriku, DIN, JIS standardsuurused järgmiselt:
Survetoruliitmike läbimõõt DIN 2353 24 ° koonuse otsas (DIN 3861 / ISO 8434-1)
TubeO.D. | ||||||
Suurus | T1 | Ø D3mm | Ø D4mm | Ø D5mm | L1mm | L2mm |
04-LL | M08×1.0 | 04 | 5.0 | 3.0 | 4.1 | 8 |
06-LL | M10×1.0 | 06 | 7.5 | 4.5 | 5.6 | 8 |
08-LL | M12×1.0 | 08 | 9.5 | 6.0 | 5.6 | 9 |
10-LL | M14×1.0 | 10 | 11.5 | 8.0 | 5.6 | 9 |
12-LL | M16×1.0 | 12 | 13.5 | 10.0 | 6.1 | 9 |
06-L | M12×1.5 | 06 | 8.1 | 4.0 | 7.1 | 10 |
08-L | M14×1.5 | 08 | 10.1 | 6.0 | 7.1 | 10 |
10-L | M16×1.5 | 10 | 12.3 | 8.0 | 7.1 | 11 |
12-L | M18×1.5 | 12 | 14.3 | 10.0 | 7.1 | 11 |
15-L | M22×1.5 | 15 | 17.3 | 12.0 | 7.1 | 12 |
18-L | M26×1.5 | 18 | 20.3 | 15.0 | 7.6 | 12 |
22-L | M30×2.0 | 22 | 24.3 | 19.0 | 7.6 | 14 |
28-L | M36×2.0 | 28 | 30.3 | 24.0 | 7.6 | 14 |
35-L | M45×2.0 | 35 | 38.0 | 30.0 | 10.6 | 16 |
42-L | M52×2.0 | 42 | 45.0 | 36.0 | 11.1 | 16 |
06-S | M14×1,5 | 06 | 8.1 | 4.0 | 7.1 | 12 |
08-S | M16×1.5 | 08 | 10.1 | 5.0 | 7.1 | 12 |
10-S | M18×1.5 | 10 | 12.3 | 7.0 | 7.6 | 12 |
12-S | M20×1.5 | 12 | 14.3 | 8.0 | 7.6 | 12 |
14-S | M22×1.5 | 14 | 16.3 | 10.0 | 8.1 | 14 |
16-S | M24×1.5 | 16 | 18.3 | 12.0 | 8.6 | 14 |
20-S | M30×2.0 | 20 | 22.9 | 16.0 | 10.6 | 16 |
25-S | M36×2.0 | 25 | 27.9 | 20.0 | 12.1 | 18 |
30-S | M42×2.0 | 30 | 33.0 | 25.0 | 13.6 | 20 |
38-S | M52×2.0 | 38 | 41.0 | 32.0 | 16.1 | 22 |
24 ° DKO pöördliides (DIN 3865 / DIN EN ISO 8434-4) survetoru liitmike mõõt
TubeO.D. | Ø D5mm | |||
Suurus | T | Ø D2mm | Threadkaasreläbimõõt | SWmm |
06-L | M12×1.5 | 5.5 | 10.38 | 14 |
08-L | M14×1.5 | 7.5 | 12.38 | 17 |
10-L | M16×1.5 | 9.7 | 14.38 | 19 |
12-L | M18×1.5 | 11.7 | 16.38 | 22 |
15-L | M22×1.5 | 14.7 | 20.38 | 27 |
18-L | M26×1.5 | 17.7 | 24.38 | 32 |
22-L | M30×2.0 | 21.7 | 27.84 | 36 |
28-L | M36×2.0 | 27.7 | 33.84 | 41 |
35-L | M45×2.0 | 34.5 | 42.84 | 50 |
42-L | M52×2.0 | 41.5 | 49.84 | 60 |
06-S | M14×1.5 | 5.5 | 12.38 | 17 |
08-S | M16×1.5 | 7.5 | 14.38 | 19 |
10-S | M18×1.5 | 9.7 | 16.38 | 22 |
12-S | M20×1.5 | 11.7 | 18.38 | 24 |
14-S | M22×1.5 | 13.5 | 20.38 | 27 |
16-S | M24×1.5 | 15.5 | 22.38 | 30 |
20-S | M30×2.0 | 19.5 | 29.84 | 36 |
25-S | M36×2.0 | 24.5 | 33.84 | 46 |
30-S | M42×2.0 | 29.5 | 39.84 | 50 |
38-S | M52×2.0 | 37.5 | 49.84 | 60 |
Isaste ORFS-hüdrauliliste toruliitmike ots (ISO 8434-3 / SAE J1453) / mõõtmed
Ø D5 Suurus | TubeO.D. | T UN / UNF | T MajorthreadØ mm | Ø D3mm | |
tolli | mm | ||||
4 | 1/4 | 6 | 9/16-18 | 14.0 | 5.0 |
6 | 5/16,3/8 | 8, 10 | 11/16-16 | 17.0 | 6.5 |
8 | 1/2 | 12 | 13/16-16 | 20.5 | 9.5 |
10 | 5/8 | 14, 15, 16 | 1-14 | 25.0 | 12.5 |
12 | 3/4 | 18, 20 | 1 3/16-12 | 30.0 | 15.5 |
16 | 7/8,1 | 22, 25 | 1 7/16-12 | 36.0 | 20.5 |
20 | 1 1/4 | 28, 30, 32 | 1 11/16-12 | 42.5 | 26.0 |
24 | 1 1/2 | 35, 38 | 2-12 | 50.5 | 32.0 |
32 | 2 | 50 | 2 1/2-12 | 63.0 | 45.0 |
Naiste ORFS-hüdrauliliste liitmike pöördliides (ISO 8434-3 / SAE J1453) mõõtmed
Suurus | TubeO.D. | T UN / UNF | Ø D5 Threadkaasre läbimõõt mm | SWmm | Ø D2mm | |
tolli | mm | |||||
4 | 1/4 | 6 | 9/16-18 | 12.5 | 17 | 4.0 |
6 | 5/16,3/8 | 8, 10 | 11/16-16 | 16.0 | 22 | 6.5 |
8 | 1/2 | 12 | 13/16-16 | 19.0 | 24 | 9.0 |
10 | 5/8 | 14, 15, 16 | 1-14 | 23.0 | 30 | 11.5 |
12 | 3/4 | 18, 20 | 1 3/16-12 | 28.0 | 36 | 14.0 |
16 | 7/8,1 | 22, 25 | 1 7/16-12 | 34.0 | 41 | 20.0 |
20 | 1 1/4 | 28, 30, 32 | 1 11/16-12 | 40.5 | 50 | 26.0 |
24 | 1 1/2 | 35, 38 | 2-12 | 48.0 | 60 | 32.0 |
Isaste JIC-hüdrauliliste liitmike flare toru otsa (ISO 8434-2 / SAE J514) mõõtmed
Suurus | TubeO.D. | T UN / UNF | T MajorthreadØ mm | Ø D1mm | |
tolli | mm | ||||
4 | 1/4 | 6 | 7/16-20 | 11.0 | 4.5 |
5 | 5/16 | 8 | 1/2-20 | 12.5 | 6.0 |
6 | 3/8 | 10 | 9/16-18 | 14.0 | 7.5 |
8 | 1/2 | 12 | 3/4-16 | 19.0 | 10.0 |
10 | 5/8 | 14, 15, 16 | 7/8-14 | 22.0 | 12.5 |
12 | 3/4 | 18, 20 | 1 1/16-12 | 27.0 | 15.5 |
14 | 7/8 | 22 | 1 3/16-12 | 30.0 | 18.0 |
16 | 1 | 25 | 1 5/16-12 | 33.0 | 21.5 |
20 | 1 1/4 | 28, 30, 32 | 1 5/8-12 | 41.0 | 27.5 |
24 | 1 1/2 | 35, 38 | 1 7/8-12 | 47.5 | 33.0 |
28* | 1 3/4 | 42 | 2 1/4-12 | 57.0 | 39.0 |
32 | 2 | – | 2 1/2-12 | 63.5 | 45.0 |
Naiste JIC-hüdraulikaühenduste pöördliides (ISO 8434-2 / SAE J514) mõõtmed
Suurus | TubeO.D. | T UN / UNF | SWmm | Ø D5 Threadkaasre läbimõõt mm | Ø D2mm | |
tolli | mm | |||||
4 | 1/4 | 6 | 7/16-20 | 17 | 10.0 | 4.4 |
5 | 5/16 | 8 | 1/2-20 | 17 | 11.5 | 6.0 |
6 | 3/8 | 10 | 9/16-18 | 19 | 13.0 | 7.5 |
8 | 1/2 | 12 | 3/4-16 | 22 | 17.5 | 9.9 |
10 | 5/8 | 14, 15, 16 | 7/8-14 | 27 | 20.5 | 12.3 |
12 | 3/4 | 18, 20 | 1 1/16-12 | 32 | 25.0 | 15.5 |
14 | 7/8 | 22 | 1 3/16-12 | 35 | 28.0 | 18.0 |
16 | 1 | 25 | 1 5/16-12 | 38 | 31.0 | 21.5 |
20 | 1 1/4 | 28, 30, 32 | 1 5/8-12 | 50 | 39.0 | 27.5 |
24 | 1 1/2 | 35. 38 | 1 7/8-12 | 60 | 45.5 | 33.0 |
32 | 2 | – | 2 1/2-12 | 75 | 61.5 | 45.0 |
Isase hüdraulilise adapteri 60 ° koonuse otsa (ISO / DIS 8434-6) mõõtmed
Suurus | T BSPP | D2 mm | D3 mm | L1 mm | T1 | T2 BSPP | |
BSPT | NPT (F) | ||||||
02 | G1/8A | 3.5 | 7.5 | 8 | 1/8 1/4 | 1/8 1/4 | 1/8 |
04 | G1/4A | 4.7 | 10.4 | 11 | 1/4 1/8 3/8 | 1/4 1/8 3/8 | 1/4 1/8 |
06 | G3/8A | 7.9 | 14.0 | 12 | 3/8 1/4 1/2 | 3/8 1/4 1/2 | 3/8 1/4 |
08 | G1/2A | 11.1 | 17.5 | 14 | 1/2 3/8 | 1/2 3/8 3/4 | 1/2 1/4 3/8 |
10 | G5/8A | 14.3 | 19.3 | 16 | 1/2 3/4 | 1/2 5/8 | |
12 | G3/4A | 16.7 | 22.9 | 16 | 3/4 1/2 1 | 3/4 1/2 1 | 3/4 1/4 3/8 1/2 5/8 |
16 | G1 A | 22.2 | 28.7 | 19 | 1 3/4 | 1 3/4 | 1 1/2 5/8 3/4 |
20 | G1 1/4A | 28.6 | 36.8 | 22 | 1 1/4 | 3/4 1 1 1/4 | |
24 | G1 1/2A | 33.3 | 42.7 | 22 | 1 1/2 | 1 1 1/4 1 1/2 | |
32 | G2 A | 46.0 | 54.6 | 25 | 1 1/2 2 | ||
DIN 60 ° koonuse otsa (DIN 7631) mõõtmed
TubeO.D.mm | T | Ø D1mm | Ø D2mm | L1 mm | SWmm |
4–5 06 08 10 12 15 18 22 28 35 42 | M10×1.5 M12×1.5 M14×1.5 M16×1.5 M18×1.5 M22×1.5 M26×1.5 M30×1.5 M38×1.5 M45×1.5 M52×1.5 | 3 4 6 8 10 12 15 19 25 32 39 | 8.0 9.0 11.0 13.0 15.0 19.0 22.0 26.0 33.0 40.0 47.0 | 8 10 10 11 11 12 12 14 14 16 16 | 11 12 14 17 19 24 27 32 41 46 55 |
Kuum tags: hüdraulilise adapteri liitmikud, Hiina, tootjad, tarnijad, kohandatud, messing, swagelok, Parker, Stauff, Brennan, roostevaba teras
